Our new rodent proof, all dielectric fibre optic cable NoR@T is designed in Australia to withstand aggressive Australian rodents. With a protective layer of Glass Reinforced Plastic (GRP) the cable is small, lightweight and flexible - and still impenetrable. Even if a gung-ho Australian black rat really hammer away at it, it'll still be a toothless effort.

Our new Singlesm@rt cable uses a unique cable design of composite glass fibre reinforced plastic (GRP) strength member laid in parallel to loose tube,  thus eliminates fillers found in a traditional multi loose tube design. This design provides a small and extremely cost effective cable with tensile and crush strengths comparable to the larger traditional loose tube design. The loose-tube contains up to 24 single-mode fibres and is filled with a low viscosity, non-melting gel that prevents the longitudinal passage…

jPrysmian’s MassLink™ range presents the next stage in ribbon fibre optic cable development. By using an advanced FlexRibbon™ technology, Prysmian provides an ultra-compact, lightweight outside plant cables that contains up to 6912 bend insensitive fibres, with an overall diameter small enough to fit into a 50 mm duct. FlexRibbon™ in MassLink™ combine the benefits of ribbon mass fusion splicing with smaller diameters offered by stranded fibre cables.  This brings together the best of both worlds. Features and Benefits Compact Design…

If you are looking for a system that can be easily deployed in an existing duct, sub-duct, directly buried or aerial infrastructure, then Prysmian’s RETRACTANETXS solution meets the challenge. In settings such as residential (brownfield or greenfield sites), rural and aerial applications, the RETRACTANETXS solution is fast, flexible, reliable and userfriendly. A combination of a fully integrated connectivity solutions and a full suite of innovative tools allows for efficient and effective installation practices, delivering a reduced Total Cost of Ownership. The unique RetractaCable, filled…

Designed specifically for bringing optical fibre directly to residents of high and low rise apartments and offices, the heart of the VertiCasaXS system features a new concept in optical cable construction allowing remarkably easy fibre access and break-out, reducing the demand for skilled labour and installation time and cost. The VertiCasaXS system provides a fast and flexible means of connecting users in a Multi Dwelling Unit (MDU). The system comprises a main riser cable of up to 144 fibres, which…

Our Minism@rt cables present the next stage in fibre optic cable deployment. Using state of the art manufacturing technology and process control, Prysmian has drastically miniaturised loose tube cables, offering benefits to both installers and network owners. This radical reduction in cable cross-section leads to high fibre-density cables, significantly increasing duct utilisation. This offers the potential to increase the number of fibres in a duct, lower the number of ducts needed or extend the life of the existing infrastructure, all…

Our range of underwater fibre cables are designed specifically for river, lake and harbor crossing deployment. Dual layers of armour wires give maximum protection against mechanical damage and subaquatic pressure. Add to this great resistance to hydrogen ingress and say hello to a cable that maintains its behaviour as if it were in a terrestrial environment.

Indoor drop optical fibre cable with steel wire reinforcement and LSOH sheath. Designed to run from the distribution point to the subscriber, in both home and business premises.

Large Multi-function Joints (LMJ) are for jointing of optical fibre cables up to 1344 fibres (with option to double capacity using 24 fibre single element trays). Our new range of joints is designed to integrate state of the art features into very cost effective products. They not only save you money, but are also designed to eliminate heat shrink thus no need for a heat source in the field during installation. Using Mechanical Seals to terminate the cables lowers OH&S…

Medium Multi-function Joints (MMJ) are for jointing of optical fibre cables up to 288 fibres. Our new range of joints is designed to integrate state of the art features into very cost effective products. They not only save you money, but are also designed to eliminate heat shrink thus no need for a heat source in the field during installation. Using Mechanical Seals to terminate the cables lowers OH&S risks and negates risk of fires. Not only are the new…

Compact Multi-function Joints (CMJ) are for jointing of optical fibre cables up to 144 fibres. Our new range of joints is designed to integrate state of the art features into very cost effective products. These optical fibre cable jointers not only save you money, but are also designed to eliminate heat shrink thus no need for a heat source in the field during installation. Using Mechanical Seals to terminate the cables lowers OH&S risks and negates risk of fires. CMJ…

Ribbon Fibre Cables offer extremely high fibre density as well as the advantages of Mass Fusion Splicing - where 12 fibres can be fusion spliced in one operation. This has the potential to speed up network roll out and significantly cut splicing and installation costs. Prysmian is the only cable supplier manufacturing fibre ribbons in Australia, these are supplied in a range of fibre count cables from small 72 fibre cables to high capacity 864 fibre cables. Designs up to…